Graybyt3 Was Here

Linux vps-4656817-x.dattaweb.com 5.14.0-570.33.2.el9_6.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Aug 14 07:37:35 EDT 2025 x86_64
Apache
200.58.107.103

pipewire.conf

# Daemon config file for PipeWire version "1.0.1" #
#
# Copy and edit this file in /etc/pipewire for system-wide changes
# or in ~/.config/pipewire for local changes.
#
# It is also possible to place a file with an updated section in
# /etc/pipewire/pipewire.conf.d/ for system-wide changes or in
# ~/.config/pipewire/pipewire.conf.d/ for local changes.
#

context.properties = {
    ## Configure properties in the system.
    #library.name.system                   = support/libspa-support
    #context.data-loop.library.name.system = support/libspa-support
    #support.dbus                          = true
    #link.max-buffers                      = 64
    link.max-buffers                       = 16                       # version < 3 clients can't handle more
    #mem.warn-mlock                        = false
    #mem.allow-mlock                       = true
    #mem.mlock-all                         = false
    #clock.power-of-two-quantum            = true
    #log.level                             = 2
    #cpu.zero.denormals                    = false

core.daemon = true              # listening for socket connections
    core.name   = pipewire-0        # core name and socket name

## Properties for the DSP configuration.
    #default.clock.rate          = 48000
    #default.clock.allowed-rates = [ 48000 ]
    #default.clock.quantum       = 1024
    #default.clock.min-quantum   = 32
    #default.clock.max-quantum   = 2048
    #default.clock.quantum-limit = 8192
    #default.video.width         = 640
    #default.video.height        = 480
    #default.video.rate.num      = 25
    #default.video.rate.denom    = 1
    #
    #settings.check-quantum      = false
    #settings.check-rate         = false
    #
    # These overrides are only applied when running in a vm.
    vm.overrides = {
        default.clock.min-quantum = 1024
    }

# keys checked below to disable module loading
    module.x11.bell = true
    # enables autoloading of access module, when disabled an alternative
    # access module needs to be loaded.
    module.access = true
    # enables autoloading of module-jackdbus-detect
    module.jackdbus-detect = true
}

context.spa-libs = {
    #<factory-name regex> = <library-name>
    #
    # Used to find spa factory names. It maps an spa factory name
    # regular expression to a library name that should contain
    # that factory.
    #
    audio.convert.* = audioconvert/libspa-audioconvert
    avb.*           = avb/libspa-avb
    api.alsa.*      = alsa/libspa-alsa
    api.v4l2.*      = v4l2/libspa-v4l2
    api.libcamera.* = libcamera/libspa-libcamera
    api.bluez5.*    = bluez5/libspa-bluez5
    api.vulkan.*    = vulkan/libspa-vulkan
    api.jack.*      = jack/libspa-jack
    support.*       = support/libspa-support
    #videotestsrc   = videotestsrc/libspa-videotestsrc
    #audiotestsrc   = audiotestsrc/libspa-audiotestsrc
}

context.modules = [
    #{ name = <module-name>
    #    ( args  = { <key> = <value> ... } )
    #    ( flags = [ ( ifexists ) ( nofail ) ] )
    #    ( condition = [ { <key> = <value> ... } ... ] )
    #}
    #
    # Loads a module with the given parameters.
    # If ifexists is given, the module is ignored when it is not found.
    # If nofail is given, module initialization failures are ignored.
    # If condition is given, the module is loaded only when the context
    # properties all match the match rules.
    #

# Uses realtime scheduling to boost the audio thread priorities. This uses
    # RTKit if the user doesn't have permission to use regular realtime
    # scheduling. You can also clamp utilisation values to improve scheduling
    # on embedded and heterogeneous systems, e.g. Arm big.LITTLE devices.
    { name = libpipewire-module-rt
        args = {
            nice.level    = -11
            #rt.prio      = 88
            #rt.time.soft = -1
            #rt.time.hard = -1
            #uclamp.min = 0
            #uclamp.max = 1024
        }
        flags = [ ifexists nofail ]
    }

# The native communication protocol.
    { name = libpipewire-module-protocol-native
        args = {
            # List of server Unix sockets, and optionally permissions
            #sockets = [ { name = "pipewire-0" }, { name = "pipewire-0-manager" } ]
        }
    }

# The profile module. Allows application to access profiler
    # and performance data. It provides an interface that is used
    # by pw-top and pw-profiler.
    { name = libpipewire-module-profiler }

# Allows applications to create metadata objects. It creates
    # a factory for Metadata objects.
    { name = libpipewire-module-metadata }

# Creates a factory for making devices that run in the
    # context of the PipeWire server.
    { name = libpipewire-module-spa-device-factory }

# Creates a factory for making nodes that run in the
    # context of the PipeWire server.
    { name = libpipewire-module-spa-node-factory }

# Allows creating nodes that run in the context of the
    # client. Is used by all clients that want to provide
    # data to PipeWire.
    { name = libpipewire-module-client-node }

# Allows creating devices that run in the context of the
    # client. Is used by the session manager.
    { name = libpipewire-module-client-device }

# The portal module monitors the PID of the portal process
    # and tags connections with the same PID as portal
    # connections.
    { name = libpipewire-module-portal
        flags = [ ifexists nofail ]
    }

# The access module can perform access checks and block
    # new clients.
    { name = libpipewire-module-access
        args = {
            # Socket-specific access permissions
            #access.socket = { pipewire-0 = "default", pipewire-0-manager = "unrestricted" }

# Deprecated legacy mode (not socket-based),
            # for now enabled by default if access.socket is not specified
            #access.legacy = true
        }
        condition = [ { module.access = true } ]
    }

# Makes a factory for wrapping nodes in an adapter with a
    # converter and resampler.
    { name = libpipewire-module-adapter }

# Makes a factory for creating links between ports.
    { name = libpipewire-module-link-factory }

# Provides factories to make session manager objects.
    { name = libpipewire-module-session-manager }

# Use libcanberra to play X11 Bell
    { name = libpipewire-module-x11-bell
        args = {
            #sink.name = ""
            #sample.name = "bell-window-system"
            #x11.display = null
            #x11.xauthority = null
        }
        flags = [ ifexists nofail ]
        condition = [ { module.x11.bell = true } ]
    }
    { name = libpipewire-module-jackdbus-detect
        args = {
            #jack.library     = libjack.so.0
            #jack.server      = null
            #jack.client-name = PipeWire
            #jack.connect     = true
            #tunnel.mode      = duplex  # source|sink|duplex
            source.props = {
                #audio.channels = 2
		#midi.ports = 1
                #audio.position = [ FL FR ]
                # extra sink properties
            }
            sink.props = {
                #audio.channels = 2
		#midi.ports = 1
                #audio.position = [ FL FR ]
                # extra sink properties
            }
        }
        flags = [ ifexists nofail ]
        condition = [ { module.jackdbus-detect = true } ]
    }
]

context.objects = [
    #{ factory = <factory-name>
    #    ( args  = { <key> = <value> ... } )
    #    ( flags = [ ( nofail ) ] )
    #    ( condition = [ { <key> = <value> ... } ... ] )
    #}
    #
    # Creates an object from a PipeWire factory with the given parameters.
    # If nofail is given, errors are ignored (and no object is created).
    # If condition is given, the object is created only when the context properties
    # all match the match rules.
    #
    #{ factory = spa-node-factory   args = { factory.name = videotestsrc node.name = videotestsrc node.description = videotestsrc "Spa:Pod:Object:Param:Props:patternType" = 1 } }
    #{ factory = spa-device-factory args = { factory.name = api.jack.device foo=bar } flags = [ nofail ] }
    #{ factory = spa-device-factory args = { factory.name = api.alsa.enum.udev } }
    #{ factory = spa-node-factory   args = { factory.name = api.alsa.seq.bridge node.name = Internal-MIDI-Bridge } }
    #{ factory = adapter            args = { factory.name = audiotestsrc node.name = my-test node.description = audiotestsrc } }
    #{ factory = spa-node-factory   args = { factory.name = api.vulkan.compute.source node.name = my-compute-source } }

# A default dummy driver. This handles nodes marked with the "node.always-process"
    # property when no other driver is currently active. JACK clients need this.
    { factory = spa-node-factory
        args = {
            factory.name    = support.node.driver
            node.name       = Dummy-Driver
            node.group      = pipewire.dummy
            priority.driver = 20000
            #clock.id       = monotonic # realtime | tai | monotonic-raw | boottime
            #clock.name     = "clock.system.monotonic"
        }
    }
    { factory = spa-node-factory
        args = {
            factory.name    = support.node.driver
            node.name       = Freewheel-Driver
            priority.driver = 19000
            node.group      = pipewire.freewheel
            node.freewheel  = true
        }
    }

# This creates a new Source node. It will have input ports
    # that you can link, to provide audio for this source.
    #{ factory = adapter
    #    args = {
    #        factory.name     = support.null-audio-sink
    #        node.name        = "my-mic"
    #        node.description = "Microphone"
    #        media.class      = "Audio/Source/Virtual"
    #        audio.position   = "FL,FR"
    #    }
    #}

# This creates a single PCM source device for the given
    # alsa device path hw:0. You can change source to sink
    # to make a sink in the same way.
    #{ factory = adapter
    #    args = {
    #        factory.name           = api.alsa.pcm.source
    #        node.name              = "alsa-source"
    #        node.description       = "PCM Source"
    #        media.class            = "Audio/Source"
    #        api.alsa.path          = "hw:0"
    #        api.alsa.period-size   = 1024
    #        api.alsa.headroom      = 0
    #        api.alsa.disable-mmap  = false
    #        api.alsa.disable-batch = false
    #        audio.format           = "S16LE"
    #        audio.rate             = 48000
    #        audio.channels         = 2
    #        audio.position         = "FL,FR"
    #    }
    #}

# Use the metadata factory to create metadata and some default values.
    #{ factory = metadata
    #    args = {
    #        metadata.name = my-metadata
    #        metadata.values = [
    #            { key = default.audio.sink   value = { name = somesink } }
    #            { key = default.audio.source value = { name = somesource } }
    #        ]
    #    }
    #}
]

context.exec = [
    #{   path = <program-name>
    #    ( args = "<arguments>" )
    #    ( condition = [ { <key> = <value> ... } ... ] )
    #}
    #
    # Execute the given program with arguments.
    # If condition is given, the program is executed only when the context
    # properties all match the match rules.
    #
    # You can optionally start the session manager here,
    # but it is better to start it as a systemd service.
    # Run the session manager with -h for options.
    #
    #{ path = "/usr/bin/pipewire-media-session" args = ""
    #  condition = [ { exec.session-manager = null } { exec.session-manager = true } ] }
    #
    # You can optionally start the pulseaudio-server here as well
    # but it is better to start it as a systemd service.
    # It can be interesting to start another daemon here that listens
    # on another address with the -a option (eg. -a tcp:4713).
    #
    #{ path = "/usr/bin/pipewire" args = "-c pipewire-pulse.conf"
    #  condition = [ { exec.pipewire-pulse = null } { exec.pipewire-pulse = true } ] }
]

System Information
*ReClick For Close
File : BlackDragon /acciones/about.php

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2024-11-11 09:34:31
..	dir	-	root/root	0755	2025-08-05 03:58:58
client-rt.conf.avail	dir	-	root/root	0755	2024-11-11 09:34:29
client.conf.avail	dir	-	root/root	0755	2024-11-11 09:34:29
filter-chain	dir	-	root/root	0755	2024-11-11 09:34:29
pipewire-pulse.conf.avail	dir	-	root/root	0755	2024-11-11 09:34:31
pipewire-pulse.conf.d	dir	-	root/root	0755	2024-04-03 02:59:36
pipewire.conf.avail	dir	-	root/root	0755	2024-11-11 09:34:29
pipewire.conf.d	dir	-	root/root	0755	2024-04-03 02:59:36
client-rt.conf	file	4.06 KB	root/root	0644	2024-04-03 02:58:57
client.conf	file	2.61 KB	root/root	0644	2024-04-03 02:58:57
filter-chain.conf	file	1.88 KB	root/root	0644	2024-04-03 02:58:57
jack.conf	file	4.14 KB	root/root	0644	2024-04-03 02:58:57
minimal.conf	file	12.98 KB	root/root	0644	2024-04-03 02:58:57
pipewire-aes67.conf	file	4.08 KB	root/root	0644	2024-04-03 02:58:57
pipewire-avb.conf	file	1.98 KB	root/root	0644	2024-04-03 02:58:57
pipewire-pulse.conf	file	5.95 KB	root/root	0644	2024-04-03 02:58:57
pipewire-vulkan.conf	file	3.98 KB	root/root	0644	2024-04-03 02:58:57
pipewire.conf	file	11.92 KB	root/root	0644	2024-04-03 02:58:57