Graybyt3 Was Here

Linux vps-4656817-x.dattaweb.com 5.14.0-570.33.2.el9_6.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Aug 14 07:37:35 EDT 2025 x86_64
Apache
200.58.107.103

README

The GNU Privacy Guard 2
                      =========================
                            Version 2.3

* INTRODUCTION

GnuPG is a complete and free implementation of the OpenPGP standard
  as defined by RFC4880 (also known as PGP).  GnuPG enables encryption
  and signing of data and communication, and features a versatile key
  management system as well as access modules for public key
  directories.

GnuPG, also known as GPG, is a command line tool with features for
  easy integration with other applications.  A wealth of frontend
  applications and libraries are available that make use of GnuPG.
  Starting with version 2 GnuPG provides support for S/MIME and Secure
  Shell in addition to OpenPGP.

GnuPG is Free Software (meaning that it respects your freedom). It
  can be freely used, modified and distributed under the terms of the
  GNU General Public License.

* BUILD INSTRUCTIONS

GnuPG 2.3 depends on the following GnuPG related packages:

npth         (https://gnupg.org/ftp/gcrypt/npth/)
    libgpg-error (https://gnupg.org/ftp/gcrypt/libgpg-error/)
    libgcrypt    (https://gnupg.org/ftp/gcrypt/libgcrypt/)
    libksba      (https://gnupg.org/ftp/gcrypt/libksba/)
    libassuan    (https://gnupg.org/ftp/gcrypt/libassuan/)

You should get the latest versions of course, the GnuPG configure
  script complains if a version is not sufficient.

Several other standard libraries are also required.  The configure
  script prints diagnostic messages if one of these libraries is not
  available and a feature will not be available..

You also need the Pinentry package for most functions of GnuPG;
  however it is not a build requirement.  Pinentry is available at
  https://gnupg.org/ftp/gcrypt/pinentry/ .

After building and installing the above packages in the order as
  given above, you may continue with GnuPG installation (you may also
  just try to build GnuPG to see whether your already installed
  versions are sufficient).

As with all packages, you just have to do

./configure
    make
    make check
    make install

The "make check" is optional but highly recommended.  To run even
  more tests you may add "--enable-all-tests" to the configure run.
  Before running the "make install" you might need to become root.

If everything succeeds, you have a working GnuPG with support for
  OpenPGP, S/MIME, ssh-agent, and smartcards.

In case of problem please ask on the gnupg-users@gnupg.org mailing
  list for advise.

Instruction on how to build for Windows can be found in the file
  doc/HACKING in the section "How to build an installer for Windows".
  This requires some experience as developer.

You may run

gpgconf --list-dirs

to view the directories used by GnuPG.

To quickly build all required software without installing it, the
  Speedo method may be used:

make -f build-aux/speedo.mk  native

This method downloads all required libraries and does a native build
  of GnuPG to PLAY/inst/.  GNU make is required and you need to set
  LD_LIBRARY_PATH to $(pwd)/PLAY/inst/lib to test the binaries.

** Specific build problems on some machines:

*** Apple OSX 10.x using XCode

On some versions the correct location of a header file can't be
  detected by configure.  To fix that you should run configure like
  this

./configure  gl_cv_absolute_stdint_h=/usr/include/stdint.h

Add other options as needed.

*** Systems without a full C99 compiler

If you run into problems with your compiler complaining about dns.c
  you may use

./configure --disable-libdns

Add other options as needed.

* RECOMMENDATIONS

** Socket directory

GnuPG uses Unix domain sockets to connect its components (on Windows
  an emulation of these sockets is used).  Depending on the type of
  the file system, it is sometimes not possible to use the GnuPG home
  directory (i.e. ~/.gnupg) as the location for the sockets.  To solve
  this problem GnuPG prefers the use of a per-user directory below the
  the /run (or /var/run) hierarchy for the sockets.  It is thus
  suggested to create per-user directories on system or session
  startup.  For example, the following snippet can be used in
  /etc/rc.local to create these directories:

[ ! -d /run/user ] && mkdir /run/user
      awk -F: </etc/passwd '$3 >= 1000 && $3 < 65000 {print $3}' \
        | ( while read uid rest; do
              if [ ! -d "/run/user/$uid" ]; then
                mkdir /run/user/$uid
                chown $uid /run/user/$uid
                chmod 700 /run/user/$uid
              fi
            done )

* DOCUMENTATION

The complete documentation is in the texinfo manual named
  `gnupg.info'.  Run "info gnupg" to read it.  If you want a a
  printable copy of the manual, change to the "doc" directory and
  enter "make pdf" For a HTML version enter "make html" and point your
  browser to gnupg.html/index.html.  Standard man pages for all
  components are provided as well.  An online version of the manual is
  available at [[https://gnupg.org/documentation/manuals/gnupg/]] .  A
  version of the manual pertaining to the current development snapshot
  is at [[https://gnupg.org/documentation/manuals/gnupg-devel/]] .

* Using the legacy version GnuPG 1.4

The 1.4 version of GnuPG is only intended to allow decryption of old
  data material using legacy keys which are not anymore supported by
  GnuPG 2.x.  To install both versions alongside, it is suggested to
  rename the 1.4 version of "gpg" to "gpg1" as well as the
  corresponding man page.  Newer releases of the 1.4 branch will
  likely do this by default.

* HOW TO GET MORE INFORMATION

A description of new features and changes since version 2.1 can be
  found in the file "doc/whats-new-in-2.1.txt" and online at
  "https://gnupg.org/faq/whats-new-in-2.1.html" .

The primary WWW page is "https://gnupg.org"
  The primary FTP site is "https://gnupg.org/ftp/gcrypt/"

See [[https://gnupg.org/download/mirrors.html]] for a list of
  mirrors and use them if possible.  You may also find GnuPG mirrored
  on some of the regular GNU mirrors.

We have some mailing lists dedicated to GnuPG:

gnupg-announce@gnupg.org   For important announcements like new
                                versions and such stuff.  This is a
                                moderated list and has very low traffic.
                                Do not post to this list.

gnupg-users@gnupg.org      For general user discussion and
                                help.

gnupg-devel@gnupg.org      GnuPG developers main forum.

You subscribe to one of the list by sending mail with a subject of
  "subscribe" to x-request@gnupg.org, where x is the name of the
  mailing list (gnupg-announce, gnupg-users, etc.). See
  https://gnupg.org/documentation/mailing-lists.html for archives
  of the mailing lists.

Please direct bug reports to [[https://bugs.gnupg.org]] or post them
  direct to the mailing list <gnupg-devel@gnupg.org>.

Please direct questions about GnuPG to the users mailing list or one
  of the PGP newsgroups; please do not direct questions to one of the
  authors directly as we are busy working on improvements and bug
  fixes.  The English and German mailing lists are watched by the
  authors and we try to answer questions when time allows us.

Commercial grade support for GnuPG is available; for a listing of
  offers see https://gnupg.org/service.html .  Maintaining and
  improving GnuPG requires a lot of time.  Since 2001, g10 Code GmbH,
  a German company owned and headed by GnuPG's principal author Werner
  Koch, is bearing the majority of these costs.  To keep GnuPG in a
  healthy state, they need your support.

Please consider to donate at https://gnupg.org/donate/ .

# This file is Free Software; as a special exception the authors gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved. For conditions
# of the whole package, please see the file COPYING.  This file is
# distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY, to the extent permitted by law; without even the implied
# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# Local Variables:
# mode:org
# End:

System Information
*ReClick For Close
File : BlackDragon /acciones/about.php

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2024-11-11 09:20:22
..	dir	-	root/root	0755	2025-08-26 06:54:37
examples	dir	-	root/root	0755	2024-11-11 09:20:22
AUTHORS	file	10.13 KB	root/root	0644	2021-04-12 06:21:00
DCO	file	1.23 KB	root/root	0644	2016-02-02 06:05:16
DETAILS	file	69.73 KB	root/root	0644	2021-10-05 09:13:23
FAQ	file	278 B	root/root	0644	2017-03-17 08:34:37
HACKING	file	18.16 KB	root/root	0644	2021-03-11 12:07:49
KEYSERVER	file	3.02 KB	root/root	0644	2014-06-25 04:17:29
NEWS	file	157.99 KB	root/root	0644	2021-10-12 03:12:41
OpenPGP	file	4.93 KB	root/root	0644	2017-03-17 08:34:37
README	file	8.27 KB	root/root	0644	2021-08-24 04:31:17
THANKS	file	13.21 KB	root/root	0644	2016-02-02 06:05:16
TODO	file	3.71 KB	root/root	0644	2016-02-02 06:05:16
TRANSLATE	file	2.18 KB	root/root	0644	2017-09-12 10:50:57